13/02/2014

DM1100 ZC: Deburring and Edge Rounding in One Machine

DM1100 ZC: Deburring and Edges Rounding Machine

DM edge rounding machines are available with deburring station before the cross belts.

The soft contact roller Ø240mm can grind away burrs from laser and plasma, while the cross belts will remove sharp edges, rounding them with extreme efficiency. These machines can actually work parts down to 50x50mm.

The stations are independent. This makes possible the operation only for edges rounding (without abrasive belt) and only for parts finishing in a second step after deburring and edges rounding.


These models count with fixed working height, motorized control of thickness and cross belt pressure/wear.

The cross belts are positioned at 35º, which permits the use of the full width of conveyor belt. Parts will not be placed at an angle as it is done with DM1100 C. More, we can have a straight finishing after edges rounding if a 3rd station is required (abrasive belt or brush unit).

This machine is available in 2 sizes: working capacities of 660mm and 1100mm (DM660 ZC and DM1100 ZC).
Check the demonstration video below where a stainless steel laser cut part is deburred and edge rounded. See also more examples at www.nsmaquinas.com

Contact us for more information to the email marketing@nsmaquinas.com